Maxter China cadalog

Maxter 產品是安全可靠的動物麻醉劑，
由韓國獸醫學科，研究所，動物醫院，
消防廳及動物園，農場所使用。
(簡體)간체
http://www.maxter.org/catalog_China(J).pdf 
(繁剃)번체
http://www.maxter.org/catalog_China(B).pdf

 

MAXTER Syringe

MAXTER INJECTORS USEWAY
How to compress Animal injectors
Click Download useway (p.09-11)

insert the normal injector with 20-30 cc capacity behind the animal injector and secure the space for drug injection

 -> inject drug with the small injector and insert the injector needle for compression

-> draw out the animal injector in the state of strong compression by the normal injector.

In order to make compression stronger, it is effective to compress using a needle as thick as blow-gun one.

When the rubber bucking will not move, it is okay to push it with wire, etc.  

The as compression type is completed by inserting the injector needle at the lighter gas cask into the animal injector,

inject the fluid gas and then draw out the animal injector.  

In case of gas injection, it is effective using the rubber for bicycle to prevent leakage.

The state of compression is maintained about 40-50 minutes.

In case of over 3cc drug injection,  it is quick and powerful to use the gas type.

 How to load
1. Slip the safety up front -> lift up finger stop -> step on the pedal -> pull the trigger -> keep the launch position
2. Insert animal syringe from the gun point. (Note: One of the three wings on the syringe has to face down on the gun point. This means when looking at gunbarrel from behind, syringe wing should not be seen then push it all the way back to the gunbarrel.
3. Cover up front part of syringe arrow with a cloth then pull. When you hear "click" sound from the trigger assembly, it means loaded correctly.

How to aim
1. When in launch preparation position, moving gap start point is going to be standard then aline the end of gunbarrel and the target.
2. Projected syringe front and target should be lined up. Depend on the distance, aim it up and down. (Distance adjustment and up, down, right, left adjustment can be different by each individual)
3. Take advantage of animal syringe which tend to fly straight.
4. Syringe arrow position should be same as illustrated on right for higher accuracy.
How to undo the launch position
To undo the launch position, hold the handle with one hand and with the other hand, pull the trigger.

Precaution
Do NOT Dry Fire 1. When animal syringe is fired without being loaded, percussion break away from gunbarrel. Please double check.
2. Also, when firing, the hand that holds the gunbarrel must not block the percussion route.
3. After 10 to 20 firing, apply lubricant inside the gunbarrel. (For the lubricant, use water wax used for cars.)
4. Before loading syringe arrow, make sure backside cork is completely locked. If this step is neglected, shot will be out of its

Syringe Usage

※Both the gas fill system and the air compression system open the top of the syringe and apply the lid to the cap and coverthe lid. Move the needle to the syringe, lock the back, and use it.

Gas compression system

1.The gas fiiled method inserts of one syringe to the compression chamber through a sigle injection.

 2.Charge it with liquid gas as shown in figure left. When the gas is visually checked at the bottom of  the syringe, it is kept for two hours. Advantage: More than twice as much momentum as air compression.

Large doses of injections are injected momentarily and can be seen and fired with compression.

 Air compression system

1. Attach the 30cc syringe to rear of the syringe and pump the pump more   than 7times to compress the air.

2. Make sure that the water is immersed in the glass and the release.

 3.The compressed time is used for 24 hours and a gas is not available.

 

How to use syringe

1. When the rubber part of syringe is not inserted, push down a little.
2. Adjust the rubber up and down with big syringe to make room to insert drug
3. Insert drug
4. Spin syringe niddle (silicon rubber stopper) strongly to insert.
5. Push drug syringe from behind with the big syringe strongly then pull it off

useway syringe anesthesia Watch youtube

https://youtu.be/bXYsVABYfeg

Shooting the rope reel

Before shooting, undo the rope 40 to 50 meter.

How to change the rope

1. Measure exactly half from each side to mark center. Use 'R' to insert ball then tie
2. Each side balance is correlated with accuracy. Try practice shooting several times and make adjustment
3. Loosen the screw on the burst -> remove the gunbarrel -> cut the latex rope to insert onto fixed ring -> once the rope is inserted on the fixed ring, adjust the strength of the rope

Introduce 
Have you ever find homeless dogs or wild animals in danger?
There is nothing that can compensate death of animals. 
Maxter can save homeless dogs and wild animals with safe anesthesia. 
Many of college veterinary departments, veterinary clinics, laboratories, fire stations, zoo,and animal farm uses Maxter products. 
 
Aim
As a latex shooter based on a perfectly unique method, which have been improved for the quality and performance up to date, MAXTER series are used in shooting a life saving rope for a long distance, to anesthetize and treatanimals, speargun, to anesthetize and seige of big fised, to collect nuts from tree, to enjoy a new sport. 
 
Company
We have been studied and developed in Latex shooting equipments for longtime, and then as o now we developed a new shooting gun which is operated by latex elastic force as a light and silent. 
We are looking ofrward to your support with enouragement earnestly. 
Thank you
Maxter English Catalog 
http://www.maxter.org/catalog_Eng.pdf

MAXTER INJECTORS USE

MAXTER INJECTOR USEWAY

MAXTER

Maxter Enlish Site

Go MAXTER

http://maxter.cafe24.com/front/php/newpage.php?code=12

Internet Phon: 070-7502-9040

Phon: 82-10-3796-8488

Total Length	Weight	Raw Material	Rope Shooting Range	Syringe Shooting Range	Reel Hook Shooting Range
88cm	2.5Kg	Tempered Aluminum	60M	60M	60M

After overing the front part of a syringe arrow with cloth or handkerchedf, pull it back, and push it in the trigger frame which is in the bak part of MAXTER. In so doing, a click sound is heard, shooting is ready.

By harmonizing the projection part in the front part of a arrow with a mark through a hole, shoot the arrow to find the fiduial point. Based on the fiducial point, tont the animing point by moving up and down depending on distance.  The position of the arrow's feathers should be maintained as in the picture on the rihgt to enhane the exactitude of shooting. 

Befor fully loading a syringe arrow, it is prereqisite to make it sure that the syringe arrow is pulled back perfectly to the end of the back plug. In case it is loosned, thereis a possibility that the syringe arrow is show wrongly. 

To anesthetize animals. To shoot a rope. To shoot a reel hook. Speargun. To sheet a fishing hrpoon. To injection fish.

First of all, set up the central point. Measure both left and right lengths accurately from the central point. After inserting a ball by using,

 bind the cable with a tie.
As the balance adjustment of both sides is closely related to the exactitude, it should be adjusted in the aforementioned method after having shot several times.

After keeping 40-50 m of a reel line untied, shoot the reel line

U'sage/sue/ Latex tube

11mm : 20M, 30M 25mm : 30M, 40M

Shooting range

Maximum : 40M Effetive : 30M

After pushing the safely of a tringger frame forward and erecting the mobing pin vertically, keep the equipment ready for firing by reading on the foot sheet and pulling the hadle. Injet the animal infector for firing from the gun muzzle on the condition of aiming one of three wings of the injetor rear at the muzzle bottom vetically, thus making the injector the injetor wings invisible from the the injector needle. Not following this method, the animal injetor will not fly normally and get damaged.

Fire the injector after indenfifying the end point of gun muzzle with target by making the staring point of  the moving gap directly before the percussion lock in the state of shot preparation. Control distance and direction is performed in consideration of each individual's firing posture and habit.

Prohibition of dry fire : the unlozded shot of animal infector causes the percussion lok to fall out of the barrel. You must handle the infector with doubled care.
The removal o shot readiness requires you to catch a handle with one hand and draw a trigger with another on. Moreover, the prinpoint shot requires you to totally take away your hand, which catches the barrel, from the movement course of prercussion lock.
For a smooth shot, apply the lubrication oil inside the barrel after firfing 70-80times.


Remove srews from the perussion lock ->remove the barrel ->cut the latex string to charge with scissors in order to fix aother into the fixed ring->fix the string into the fixed ring using a drill

Control the strength of latex string, depending on your taste.

Each of two arrows can be shot by one shot.
Maximum: 25M
Effective : 20M

After pushing the safely of a tringger frame forward and erecting the mobing pin vertically, keep the equipment ready for firing by reading on the foot sheet and pulling the hadle. Injet the animal infector for firing from the gun muzzle on the condition of aiming one of three wings of the injetor rear at the muzzle bottom vetically, thus making the injector the injetor wings invisible from the the injector needle. Not following this method, the animal injetor will not fly normally and get damaged.

Fire the injector after indenfifying the end point of gun muzzle with target by making the staring point of  the moving gap directly before the percussion lock in the state of shot preparation. Control distance and direction is performed in consideration of each individual's firing posture and habit.

'


Prohibition of dry fire : the unlozded shot of animal infector causes the percussion lok to fall out of the barrel. You must handle the infector with doubled care.
The removal o shot readiness requires you to catch a handle with one hand and draw a trigger with another on. Moreover, the prinpoint shot requires you to totally take away your hand, which catches the barrel, from the movement course of prercussion lock.
For a smooth shot, apply the lubrication oil inside the barrel after firfing 70-80times.

Remove srews from the perussion lock ->remove the barrel ->cut the latex string to charge with scissors in order to fix aother into the fixed ring->fix the string into the fixed ring using a drill

Control the strength of latex string, depending on your taste.

Total Length	Weight	Raw Material	Maximum Shooting Range	Effetive Range	Reel Hook Shooting Range
68Cm	1.1Kg	Tempered Aluminum	18m	10m	14m

Left-had and Right-had can be controled
Tow sringers can be shot at once
Long distance and near distane shootings are available

Each of two arrows can be shot by one shot.
Maximum: 40M
Effective : 30M

After pushing the safely of a tringger frame forward and erecting the mobing pin vertically, keep the equipment ready for firing by reading on the foot sheet and pulling the hadle. Injet the animal infector for firing from the gun muzzle on the condition of aiming one of three wings of the injetor rear at the muzzle bottom vetically, thus making the injector the injetor wings invisible from the the injector needle. Not following this method, the animal injetor will not fly normally and get damaged.

Fire the injector after indenfifying the end point of gun muzzle with target by making the staring point of  the moving gap directly before the percussion lock in the state of shot preparation. Control distance and direction is performed in consideration of each individual's firing posture and habit.

Prohibition of dry fire : the unlozded shot of animal infector causes the percussion lok to fall out of the barrel. You must handle the infector with doubled care.
The removal o shot readiness requires you to catch a handle with one hand and draw a trigger with another on. Moreover, the prinpoint shot requires you to totally take away your hand, which catches the barrel, from the movement course of prercussion lock.
For a smooth shot, apply the lubrication oil inside the barrel after firfing 70-80times.

Remove srews from the perussion lock ->remove the barrel ->cut the latex string to charge with scissors in order to fix aother into the fixed ring->fix the string into the fixed ring using a drill

Control the strength of latex string, depending on your taste.






 

	Goods		Name	Price	Note
			3cc, 3.5cc	$
			6cc	$
			Blow Gun Injector	$
				$
				$
				$
				$
				$
				$
				$
				$
				$

					$
			ⓥ	a: $ b: $ c: $	9mm*3mm:1.3m 13mm*3mm:1.3m 15mm*3mm:1.3m
			ⓦ	$
			ⓤ	$

				$
		ⓢ		$
		ⓣ		$
		ⓓ		$

	injection			pricce
			M-Q NEW!!	070-7502-9040
			m:injection  1~5cc	070-7502-9040
			m-1:injection	070-7502-9040	070-7502-9040
				070-7502-9040
			6cc	070-7502-9040
			3.5cc injection	call 070-7502-9040
			blowgun injection	070-7502-9040
			10cc injection	070-7502-9040
			wing	070-7502-9040
					070-7502-9040
				070-7502-9040

photo	name		price
		blowgun		070-7502-9040
		bowgun injection		\
		wing		\
		Reel set		070-7502-9040
				070-7502-9040	MAXTER
		bag	Maxter	070-7502-9040	MAXTER gift

product		name	pricce
			uletan
			conection	070-7502-9040
			Uletan link	070-7502-9040